TNR Forum
Welcome, Guest. Please login or register.
October 23, 2017, 12:58:44 AM

Login with username, password and session length
Search:     Advanced search
SMF - Just Installed!
62498 Posts in 4597 Topics by 383 Members
Latest Member: carbed79
Home Help Search Calendar Login Register
+  TNR Forum
|-+  Projects & Mixed platforms
| |-+  My Project (Moderator: Junk)
| | |-+  New 363 for my bracket car
« previous next »
Pages: 1 [2] Print
Author Topic: New 363 for my bracket car  (Read 1433 times)
ammosteve
Hero Member
*****
Offline Offline

Posts: 882


Steve Daniels

« Reply #15 on: May 08, 2016, 03:42:48 PM »

We took our cars to SGMP for a test and tune last weekend and my car was running like doo doo...she rand 6.99, 7.00 and 6.98 in the 1/8th.  She felt flat and just wouldn't get out of her own way.  We took her home and the next day did all of the usual checks.  Did a leak down test and compression check both were good. Checked rocker arms and valve springs and they checked good. Checked plug wires and had two that showed considerably lower voltage output...pulled the plugs and found a fouled plug.  New plugs a wires and went back out last night for test and tune.  Problem solved...car was back to running normal.

60 foot     1.394           1.398        1.385       1.405
330'         4.179           4.164        4.143       4.154
660'         6.531           6.511        6.469       6.480
mph         104.15         104.32      105.45     105.46
1000'                                           8.490      8.502
1/4                                              10.208    10.220
mph                                            131.11    131.15

The 10.208 and the 131.15 were new personal best in the 1/4 with this motor. The car weighs 2810 with me in it and no ballast.
Logged
dennis112
Jr. Member
**
Offline Offline

Posts: 89


« Reply #16 on: May 08, 2016, 05:48:35 PM »

Gettin'it done Steve, Getin'it done.  Sweet!     :clap:
Logged
Dennis

65' STANG Street/Strip, 434W NA, Victor Heads, Super Vic Intake, 950 DP, Bullet SR, 11.1, 4 Spd, 4:33, Pump Gas Pushing 3550lbs.


www.prostickracing.com
ammosteve
Hero Member
*****
Offline Offline

Posts: 882


Steve Daniels

« Reply #17 on: June 26, 2017, 11:09:04 AM »

The little 363 has been a good motor...it has been a best 10.04 @ 132 and 6.36 to the 1/8 at almost 108.  A little over a year has past and we pulled her out to give back to Bam.  He has some plans to put some AFR 220 heads and a nitrous plate on and put it in his old Blue foxbody.  We put my old 331 back in to finish the season.  I'm slowly collecting parts to build a 363 of my own.
Logged
Pages: 1 [2] Print 
« previous next »
 

Powered by MySQL Powered by PHP Powered by SMF 2.0 RC5 | SMF © 2006–2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!